How to use this tool
- Enter room length, room width, total door opening width, stock board length, waste allowance.
- Select Calculate to view the result.
- Check the method and assumptions below before using the result.
Input reference and sample values
Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.
| Input | Format and units | Sample |
|---|---|---|
| Room length | Numeric value. Unit: m. Must be greater than zero. | 5 |
| Room width | Numeric value. Unit: m. Must be greater than zero. | 4 |
| Total door opening width | Numeric value. Unit: m. Zero or positive. | 0.9 |
| Stock board length | Numeric value. Unit: m. Must be greater than zero. | 2.4 |
| Waste allowance | Numeric value. Unit: %. Zero or positive. Maximum: 100. | 10 |
Result for these sample inputs
18.81 m
- Minimum stock boards
- 8
Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.
The method, explained
Required length = [2(length+width)−door widths] × allowance. Boards = ceiling(required/stock length).
Using room length = 5 m, room width = 4 m, total door opening width = 0.9 m, stock board length = 2.4 m, waste allowance = 10 %, the result is 18.81 m. Change these example inputs to match your task; use the method above to check each step.
Understanding your result
Quantity estimate; cutting patterns, miters, alcoves and reusable offcuts can change board count.
What to keep in mind
Quantity estimate; cutting patterns, miters, alcoves and reusable offcuts can change board count. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.
Methodology maintained by ClarityKit. How these tools are built and checked.