Construction & home

Blown Insulation Bag Calculator

Estimate loose-fill insulation bags from volume, installed density and bag mass.

Editable waste and coverage assumptionsCheck supplier specifications
Project planner
Project planner

Review dimensions, coverage and waste before ordering.

See the method

Measure your project

Runs on your device

Your material estimate

Your result

Let’s calculate.

Use the Calculate button to see your result.

Review the method below for assumptions and conventions.

How to use this tool

  1. Enter area, installed depth, installed density, mass per bag.
  2. Select Calculate to view the result.
  3. Check the method and assumptions below before using the result.

Input reference and sample values

Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.

InputFormat and unitsSample
AreaNumeric value. Unit: m². Must be greater than zero.100
Installed depthNumeric value. Unit: mm. Must be greater than zero.250
Installed densityNumeric value. Unit: kg/m³. Must be greater than zero.25
Mass per bagNumeric value. Unit: kg. Must be greater than zero.12

Result for these sample inputs

53 bags
Required mass (kg)
625

Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.

The method, explained

Required mass = area × depth in metres × installed density. Bags = ceiling(mass/bag mass).

A WORKED EXAMPLE

Using area = 100 m², installed depth = 250 mm, installed density = 25 kg/m³, mass per bag = 12 kg, the result is 53 bags. Change these example inputs to match your task; use the method above to check each step.

Understanding your result

Use manufacturer installed density and settled-depth guidance. Does not predict R-value or account automatically for settling.

What to keep in mind

Use manufacturer installed density and settled-depth guidance. Does not predict R-value or account automatically for settling. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.

Methodology maintained by ClarityKit. How these tools are built and checked.