How to use this tool
- Enter coated area, dry film thickness, solids by volume, waste allowance.
- Select Calculate to view the result.
- Check the method and assumptions below before using the result.
Input reference and sample values
Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.
| Input | Format and units | Sample |
|---|---|---|
| Coated area | Numeric value. Unit: m². Must be greater than zero. | 40 |
| Dry film thickness | Numeric value. Unit: µm. Must be greater than zero. | 500 |
| Solids by volume | Numeric value. Unit: %. Must be greater than zero. Maximum: 100. | 100 |
| Waste allowance | Numeric value. Unit: %. Zero or positive. Maximum: 100. | 10 |
Result for these sample inputs
22 L
Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.
The method, explained
Litres = area × dry thickness in micrometres /1000 ÷ solids fraction, with allowance.
Using coated area = 40 m², dry film thickness = 500 µm, solids by volume = 100 %, waste allowance = 10 %, the result is 22 L. Change these example inputs to match your task; use the method above to check each step.
Understanding your result
Use the combined mixed coating’s volume solids. Substrate absorption, pot life, minimum coat thickness and mixing ratios follow the product instructions.
What to keep in mind
Use the combined mixed coating’s volume solids. Substrate absorption, pot life, minimum coat thickness and mixing ratios follow the product instructions. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.
Methodology maintained by ClarityKit. How these tools are built and checked.