How to use this tool
- Enter sloped roof area, coverage per bundle, waste allowance.
- Select Calculate to view the result.
- Check the method and assumptions below before using the result.
Input reference and sample values
Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.
| Input | Format and units | Sample |
|---|---|---|
| Sloped roof area | Numeric value. Unit: m². Must be greater than zero. | 160 |
| Coverage per bundle | Numeric value. Unit: m². Must be greater than zero. | 3 |
| Waste allowance | Numeric value. Unit: %. Zero or positive. Maximum: 100. | 10 |
Result for these sample inputs
59 bundles
Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.
The method, explained
Bundles = ceiling[roof area × (1+waste/100) / coverage per bundle].
Using sloped roof area = 160 m², coverage per bundle = 3 m², waste allowance = 10 %, the result is 59 bundles. Change these example inputs to match your task; use the method above to check each step.
Understanding your result
Use actual sloped surface area and manufacturer coverage. Ridge caps, starter courses and underlayment are separate.
What to keep in mind
Use actual sloped surface area and manufacturer coverage. Ridge caps, starter courses and underlayment are separate. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.
Methodology maintained by ClarityKit. How these tools are built and checked.