How to use this tool
- Enter wall area, door and window area, exposed coverage per panel, waste allowance.
- Select Calculate to view the result.
- Check the method and assumptions below before using the result.
Input reference and sample values
Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.
| Input | Format and units | Sample |
|---|---|---|
| Wall area | Numeric value. Unit: m². Must be greater than zero. | 80 |
| Door and window area | Numeric value. Unit: m². Zero or positive. | 12 |
| Exposed coverage per panel | Numeric value. Unit: m². Must be greater than zero. | 0.8 |
| Waste allowance | Numeric value. Unit: %. Zero or positive. Maximum: 100. | 10 |
Result for these sample inputs
94 panels
Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.
The method, explained
Net cladding area = gross−openings. Panels = ceiling(net area × allowance / exposed panel coverage).
Using wall area = 80 m², door and window area = 12 m², exposed coverage per panel = 0.8 m², waste allowance = 10 %, the result is 94 panels. Change these example inputs to match your task; use the method above to check each step.
Understanding your result
Enter exposed coverage after overlap. Trims, corners and starter strips are not counted.
What to keep in mind
Enter exposed coverage after overlap. Trims, corners and starter strips are not counted. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.
Methodology maintained by ClarityKit. How these tools are built and checked.