Photography & video

Sensor Pixel Pitch Calculator

Estimate horizontal pixel pitch from active sensor width and pixel count.

Units clearly labeledCheck practical equipment limits
Photo & video desk
Photo & video desk

Match the sensor, lens and output settings to your equipment.

See the method

Set up your shot

Runs on your device

Your camera calculation

Your result

Let’s calculate.

Use the Calculate button to see your result.

Review the method below for assumptions and conventions.

How to use this tool

  1. Enter active sensor width, horizontal pixel count.
  2. Select Calculate to view the result.
  3. Check the method and assumptions below before using the result.

Input reference and sample values

Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.

InputFormat and unitsSample
Active sensor widthNumeric value. Unit: mm. Must be greater than zero.36
Horizontal pixel countNumeric value. Unit: pixels. Minimum: 1. Maximum: 10000000.6000

Result for these sample inputs

6 µm

Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.

The method, explained

Pixel pitch = active width / horizontal pixels, converted from millimetres to micrometres.

A WORKED EXAMPLE

Using active sensor width = 36 mm, horizontal pixel count = 6000 pixels, the result is 6 µm. Change these example inputs to match your task; use the method above to check each step.

Understanding your result

Uses active width and assumes uniform pixel spacing. Total megapixels alone do not determine pitch without sensor dimensions.

What to keep in mind

Uses active width and assumes uniform pixel spacing. Total megapixels alone do not determine pitch without sensor dimensions. An ideal geometric or exposure estimate. Lens behavior, stabilization, sensor crop and scene conditions may change practical results.

Methodology maintained by ClarityKit. How these tools are built and checked.