How to use this tool
- Enter gross solid wall volume, number of bricks, brick length, brick width, brick height, waste allowance.
- Select Calculate to view the result.
- Check the method and assumptions below before using the result.
Input reference and sample values
Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.
| Input | Format and units | Sample |
|---|---|---|
| Gross solid wall volume | Numeric value. Unit: m³. Must be greater than zero. | 1 |
| Number of bricks | Numeric value. Minimum: 1. Maximum: 10000000. | 500 |
| Brick length | Numeric value. Unit: mm. Must be greater than zero. | 200 |
| Brick width | Numeric value. Unit: mm. Must be greater than zero. | 100 |
| Brick height | Numeric value. Unit: mm. Must be greater than zero. | 60 |
| Waste allowance | Numeric value. Unit: %. Zero or positive. Maximum: 100. | 10 |
Result for these sample inputs
0.44 m³
Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.
The method, explained
Wet mortar volume = wall volume − brick count × individual brick volume, then apply allowance.
Using gross solid wall volume = 1 m³, number of bricks = 500, brick length = 200 mm, brick width = 100 mm, brick height = 60 mm, waste allowance = 10 %, the result is 0.44 m³. Change these example inputs to match your task; use the method above to check each step.
Understanding your result
Solid-volume estimate. Exclude cavities and openings from wall volume. This does not specify cement–sand mix or dry material quantities.
What to keep in mind
Solid-volume estimate. Exclude cavities and openings from wall volume. This does not specify cement–sand mix or dry material quantities. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.
Methodology maintained by ClarityKit. How these tools are built and checked.