How to use this tool
- Enter bar diameter, total bar length, steel density.
- Select Calculate to view the result.
- Check the method and assumptions below before using the result.
Input reference and sample values
Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.
| Input | Format and units | Sample |
|---|---|---|
| Bar diameter | Numeric value. Unit: mm. Must be greater than zero. | 12 |
| Total bar length | Numeric value. Unit: m. Zero or positive. | 100 |
| Steel density | Numeric value. Unit: kg/m³. Must be greater than zero. | 7850 |
Result for these sample inputs
88.7814084 kg
Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.
The method, explained
Mass = density × π(diameter/1000)²/4 × total length.
Using bar diameter = 12 mm, total bar length = 100 m, steel density = 7850 kg/m³, the result is 88.7814084 kg. Change these example inputs to match your task; use the method above to check each step.
Understanding your result
Solid circular nominal section. Actual product mass and rib geometry can differ; use supplier tables for purchasing precision.
What to keep in mind
Solid circular nominal section. Actual product mass and rib geometry can differ; use supplier tables for purchasing precision. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.
Methodology maintained by ClarityKit. How these tools are built and checked.