Construction & home

Tile Grout Calculator

Estimate grout mass for rectangular tiles from joint dimensions and material density.

Editable waste and coverage assumptionsCheck supplier specifications
Tiling planner
Tiling planner

Measure joint depth and use the density for your grout product.

See the method

Set tile and joint dimensions

Runs on your device

Grout quantity

Your result

Let’s calculate.

Use the Calculate button to see your result.

Review the method below for assumptions and conventions.

How to use this tool

  1. Enter tiled area, tile length, tile width, joint width, filled joint depth, grout density, waste allowance.
  2. Select Calculate to view the result.
  3. Check the method and assumptions below before using the result.

Input reference and sample values

Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.

InputFormat and unitsSample
Tiled areaNumeric value. Unit: m². Must be greater than zero.20
Tile lengthNumeric value. Unit: mm. Must be greater than zero.300
Tile widthNumeric value. Unit: mm. Must be greater than zero.300
Joint widthNumeric value. Unit: mm. Must be greater than zero.3
Filled joint depthNumeric value. Unit: mm. Must be greater than zero.8
Grout densityNumeric value. Unit: kg/L. Must be greater than zero.1.6
Waste allowanceNumeric value. Unit: %. Zero or positive. Maximum: 100.10

Result for these sample inputs

5.54863249 kg

Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.

The method, explained

Joint area fraction = 1−LW/[(L+j)(W+j)]. Grout litres = tiled area × joint fraction × depth in mm; multiply by density and waste allowance.

A WORKED EXAMPLE

Using tiled area = 20 m², tile length = 300 mm, tile width = 300 mm, joint width = 3 mm, filled joint depth = 8 mm, grout density = 1.6 kg/L, waste allowance = 10 %, the result is 5.54863249 kg. Change these example inputs to match your task; use the method above to check each step.

Understanding your result

Uniform rectangular grid and filled rectangular joints. Tile bevels, edge joints, voids and supplier yield can change consumption.

What to keep in mind

Uniform rectangular grid and filled rectangular joints. Tile bevels, edge joints, voids and supplier yield can change consumption. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.

Methodology maintained by ClarityKit. How these tools are built and checked.