ClarityHow to use this tool
- Enter area to cover, tile length, tile width, waste allowance.
- Select Calculate to view the result.
- Check the method and assumptions below before using the result.
Input reference and sample values
Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.
| Input | Format and units | Sample |
|---|---|---|
| Area to cover | Numeric value. Unit: m². Must be greater than zero. | 20 |
| Tile length | Numeric value. Unit: cm. Must be greater than zero. | 60 |
| Tile width | Numeric value. Unit: cm. Must be greater than zero. | 60 |
| Waste allowance | Numeric value. Unit: %. Zero or positive. Maximum: 100. | 10 |
Result for these sample inputs
62 tiles
Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.
The method, explained
Tiles = round up[area × (1 + waste/100)/(tile length × tile width/10000)].
Using area to cover = 20 m², tile length = 60 cm, tile width = 60 cm, waste allowance = 10 %, the result is 62 tiles. Change these example inputs to match your task; use the method above to check each step.
What to keep in mind
An area estimate; pattern layout and reusable cuts are not optimized. A material-quantity estimate, not a structural design or building-code check. Confirm site measurements, supplier coverage and waste before ordering.
Methodology maintained by ClarityKit. How these tools are built and checked.