Electrical

LED Array Power Calculator

Estimate ideal LED power and branch current for identical series strings connected in parallel.

Ideal component relationshipsUnits and assumptions explained below
Circuit workbench
Circuit workbench

Keep RMS, peak and DC values distinct.

See the method

Enter circuit values

Runs on your device

Your circuit result

Your result

Let’s calculate.

Use the Calculate button to see your result.

Review the method below for assumptions and conventions.

How to use this tool

  1. Enter forward voltage per led, current per string, leds per string, parallel strings.
  2. Select Calculate to view the result.
  3. Check the method and assumptions below before using the result.

Input reference and sample values

Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.

InputFormat and unitsSample
Forward voltage per LEDNumeric value. Unit: V. Must be greater than zero.3
Current per stringNumeric value. Unit: mA. Must be greater than zero.20
LEDs per stringNumeric value. Minimum: 1. Maximum: 10000.3
Parallel stringsNumeric value. Minimum: 1. Maximum: 10000.4

Result for these sample inputs

0.72 W
String forward voltage (V)
9
Total current (A)
0.08

Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.

The method, explained

Array LED power = forward voltage × LEDs per string × string current × number of parallel strings.

A WORKED EXAMPLE

Using forward voltage per led = 3 V, current per string = 20 mA, leds per string = 3, parallel strings = 4, the result is 0.72 W. Change these example inputs to match your task; use the method above to check each step.

Understanding your result

LED dissipation only. A suitable current regulator and thermal design are still required; driver and resistor losses are excluded.

What to keep in mind

LED dissipation only. A suitable current regulator and thermal design are still required; driver and resistor losses are excluded. Ideal-component calculation for study and estimation. It does not select safe wiring, protective devices or component ratings for an installation.

Methodology maintained by ClarityKit. How these tools are built and checked.