Electrical

Motor Torque from Power Calculator

Convert shaft mechanical power and rotational speed into torque.

Ideal component relationshipsUnits and assumptions explained below
Circuit workbench
Circuit workbench

Keep RMS, peak and DC values distinct.

See the method

Enter circuit values

Runs on your device

Your circuit result

Your result

Let’s calculate.

Use the Calculate button to see your result.

Review the method below for assumptions and conventions.

How to use this tool

  1. Enter mechanical shaft output power in kilowatts.
  2. Enter the shaft speed in revolutions per minute.
  3. Calculate torque in newton-metres and check the converted angular speed.

Input reference and sample values

Use the units and choices shown for each field. Sample values are provided for practice, not as recommendations.

InputFormat and unitsSample
Mechanical shaft powerNumeric value. Unit: kW. Zero or positive.5
Shaft speedNumeric value. Unit: rpm. Must be greater than zero.1500

Result for these sample inputs

31.8309886 N·m
Angular speed (rad/s)
157.079633
Mechanical power (W)
5000

Select Try the example in the form to load these values and calculate them again. This replaces the current form inputs. Compare the result with the method and worked explanation below.

The method, explained

Torque = mechanical power / angular speed = 1000P/(2π rpm/60).

A WORKED EXAMPLE

At 5 kW and 1,500 rpm, angular speed is about 157.079633 rad/s. Torque is 5,000 / 157.079633 ≈ 31.830989 N·m.

Understanding your result

Enter mechanical output power, not electrical input power, unless efficiency has already been accounted for.

What to keep in mind

Enter mechanical output power, not electrical input power, unless efficiency has already been accounted for. Ideal-component calculation for study and estimation. It does not select safe wiring, protective devices or component ratings for an installation.

Common questions

Can I use electrical input power?

Convert it to mechanical output power using the actual efficiency first.

Can I calculate starting torque at zero rpm?

No. Dividing power by zero angular speed is undefined; a torque-speed curve is needed.

Methodology maintained by ClarityKit. How these tools are built and checked.